Water pump - Yanmar 3TNE84/4TNE84/4TNE98/4JH2E

Water pump for tractors and other machines of the Yanmar, John Deere and other brands with engines of the Yanmar 3TNE84, Yanmar 4TNE84, Yanmar 4TNE98, Yanmar 4JH2E series of the John Deere brand, the John Deere 110 series and others.

The water pump, the radiator coolant, is one of the most important elements of the engine cooling system and this method of cooling is commonly called water cooling . The engine block and the engine head are elements that heat up to very high temperatures during operation and it is these that we want to cool with the coolant during operation. Special water channels are bored in the engine and the head for the circulation of water, which, in order to be pumped back into the engine water channels. The circulation of the coolant is possible thanks to the water pump , which is most often placed between the radiator and the engine and is driven by a V-belt from the alternator. To the pump flywheel, we screw the belt pulley in order, and then the radiator fan, which rotates together with the belt pulley, providing the air movement needed to cool the radiator while the engine is running.

Dimensions :

• height: 135 mm,
• total length: 230 mm,
• flywheel diameter: 52 mm,
• wheel bolt hole spacing: 39.50 mm (measured diagonally), 28.50 mm (measured apart),
• nozzle diameter: 21 mm (IN) / 28 mm (OUT),
• the spacing of the holes for the pump mounting screws is clearly visible in the photo,
• gasket included with the pump,
• original part numbers: 129470-42003,
• comparison numbers: -,
• part numbers: HW-YA06,
• gaskets and plugs included.

Engine models :

Yanmar :

• Yanmar 3TNE84,
• Yanmar 4TNE84,
• Yanmar 4TNE98,
• Yanmar 4JH2E.

Tractor models :

Yanmar :

• Yanmar AF28,
• Yanmar AF30,
• Yanmar AF33.
• Yanmar F265,
• Yanmar F285,
• Yanmar F305,
• Yanmar F335,
• Yanmar F435,
• Yanmar FX265,
• Yanmar FX285,
• Yanmar FX30,
• Yanmar FX335D,
• Yanmar FX435D.

John Deere :

• John Deere 110.

The most common problems and faults of the water pump are the bearing seizure , which is subjected to high rotational speeds and because the elements that directly cooperate with the pump, such as the pulley and the fan, which are not always properly balanced. Too tight a belt , worn belt , too loose V-belt, V-belt installed at the wrong angle , poor lubrication or lack of lubrication are other causes that cause damage to the water pump. The first signs of water pump damage or signs of improper operation are an unusual sound from under the hood, a coolant stain under the tractor or temperature jumps visible on the dashboard gauges.

Warehouse :
M01:B22

*Photos are for illustrative purposes only and may differ in detail from the delivered product due to differences in production over the years.