Clutch disc / 18T / Ø20 x 184 mm / 7-1/2" / Iseki TU/TM/TX / 1427-120-2500-00 / 32002

Clutch disc (pressure 33006 , 66591-13400, bearing 5-23-108-12 ) with a diameter of 184 mm, hub height 26 mm , internal diameter measured between the teeth 20 mm and 18.00 mm measured with splined teeth for tractors Iseki brand series Iseki TM17, Iseki TU155, Iseki TU170, Iseki TU1400, Iseki TU1500, Iseki TU1600, Iseki TX1300, Iseki TX1410, Iseki TX1500, Iseki TX1510, Iseki TX2140 , Iseki TX2160 with Mitsubishi K3A, Mitsubishi K3B, Mitsubishi K3C and other engines .

The clutch disc is the element responsible for transferring power from the engine (crankshaft) to the gearbox (clutch shaft). The disc is composed of a hub with a spline, which is mounted on the clutch shaft and a disc with springs with appropriately thick friction linings. The disc pressed by the second element of the clutch, the pressure plate, uses the frictional force (no friction at the moment of power transmission) of these two elements, and sets the tractor in motion. The springs in the clutch discs are responsible for reducing vibrations produced at high engine speeds.

Dimensions :

• outer diameter: 184 mm,
• inner diameter: 20 mm (measured between the cutter teeth), 18 mm (measured together with the cutter teeth),
• number of teeth: 18T,
• thickness: 8 mm,
• hub height: 26 mm,
• original part numbers: 1427-120-2500-0,
• comparison numbers: -,
• part numbers: 32002.

Tractor models :

Iseki :

• Iseki TM17,
• Iseki TU155,
• Iseki TU170,
• Iseki TU1400,
• Iseki TU1500,
• ISeki TU1600,
• Iseki TX1300,
• Iseki TX1410,
• Iseki TX1500,
• Iseki TX1510,
• Iseki TX2140,
• Iseki TX2160.

Engine models :

Mitsubishi :

• Mitsubishi K3A,
• Mitsubishi K3B,
• Mitsubishi K3C.

The first signs of clutch disc wear (abrasion) are the so-called clutch slipping , which makes it difficult or impossible for the vehicle to move and means that when the engine speed increases, the tractor does not accelerate. The clutch disc may show signs of wear, even when it is dirty with oil. It is recommended to replace the disc together with the clutch pressure plate and release bearing, because all these elements have comparable durability and wear out at the same rate. Another sign of worn clutch disc is the inability to shift into gear.

There are two types of clutch shafts in the above-mentioned tractors: 18T and 20T ( 32006 ). Before purchasing, please carefully check the number of teeth on the disc or shaft and the spacing of holes for the clutch pressure mounting screws (pressure 6-26-102-03 , 1600-120-230-00, 32001 ).

Warehouse :
M01:B81