Tarcza sprzęgła / 10T / 212 mm / Shibaura SD1603/SD1643/SD1803/SD1840/SD1843/SD2003/SD2043/SD2200/SD2203/SD2243/SD2403 / Type3
Clutch disc (pressure plate SSDTYPES3 , bearing ) with a diameter of 212 mm (), internal diameter measured between teeth 23.80 mm and 19.50 mm measured with spline teeth for Shibaura brand tractors of the Shibaura SD1603, Shibaura SD1643, Shibaura SD1803, Shibaura SD1840, Shibaura SD1843, Shibaura SD2003, Shibaura SD2043, Shibaura SD2200, Shibaura SD2203, Shibaura SD2243, Shibaura SD2403, Shibaura SD2443, Shibaura SD2603, Shibaura SD2643 , Shibaura SD2803, Shibaura SD2843, Shibaura SE2540 series and others.
The clutch disc is an element responsible for transferring power from the engine (crankshaft) to the gearbox (clutch shaft). The disc is made of a hub with a spline, which is mounted on the clutch shaft and a disc with springs with appropriately thick friction linings. The disc is pressed by the second clutch element, the pressure plate, using the friction force (no friction at the moment of power transfer) of these two elements, and sets the tractor in motion. The springs in the clutch discs are responsible for reducing vibrations generated during high rotational speeds prevailing during engine operation.
Dimensions :
- outer diameter: 212 mm,
- inner diameter: 23.80 mm (measured between teeth), 19.50 (measured together with the cutter),
- thickness: 9 mm,
- hub height: 25 mm,
- number of teeth: 10T,
- original part numbers: -,
- part numbers: CDSType3.
Tractor models :
Shibaura :
- Shibaura SD1603,
- Shibaura SD1643,
- Shibaura SD1803,
- Shibaura SD1840,
- Shibaura SD1843,
- Shibaura SD2003,
- Shibaura SD2043,
- Shibaura SD2200,
- Shibaura SD2203,
- Shibaura SD2243,
- Shibaura SD2403,
- Shibaura SD2443,
- Shibaura SD2603,
- Shibaura SD2643,
- Shibaura SD2803,
- Shibaura SD2843,
- Shibaura SE2540.
The first signs of clutch plate wear (wear) are so-called clutch slippage , which makes it difficult or impossible to move the vehicle and consists in the fact that when increasing the engine speed, the tractor does not accelerate. The clutch plate may show signs of wear, even when it is dirty with oil. It is recommended to replace the plate together with the clutch pressure plate and the release bearing, because all these elements are of comparable durability and wear out at the same rate. Another sign of clutch plate wear is the inability to engage a gear.
Warehouse :
M01:B82
Specification
Magazyn: M01:B82
State
New
Production
Substitute
Parts
Clutch
Tractor models
Shibaura SD1603
Shibaura SD1643
Shibaura SD1803
Shibaura SD1840
Shibaura SD2003
Shibaura SD2043
Shibaura SD2200
Shibaura SD2203
Shibaura SD2403
Shibaura SD2443
Shibaura SD2603
Shibaura SD2643
Shibaura SD2803
Shibaura SD2843
Shibaura SE2540
Number of teeth (pcs/T-teeth)
10T
Height (mm)
25
Outer diameter (mm)
212
Inner Diameter (mm)
19.50 / 23.80