Clutch disc (pressure plate %C5% 9Bci-do-kubota/1059-sprz %C4% 99g %C5% 82o-docisk-kubota-b1600-lfk-1600-xl124y.html">33005 , bearing %C5% BCysko-propowe-xl-653zc-33x69x23-kubota-b1600-wyciskowe.html">44019 , 67311-13320) with a diameter of 198 mm (8 inches), hub height 25 mm, internal diameter measured between teeth 25.50 mm and 20.50 mm measured with spline teeth for Kubota tractors of the Kubota A-15, Kubota A-17, Kubota A-19 series, Kubota A-155, Kubota A-175, Kubota A-195, Kubota Β1-16, Kubota Β1-17, Kubota B1600, Kubota Β1702, Kubota Β1902, Kubota GB16, Kubota GB18, Kubota GB20, Kubota GB160, Kubota GB175, Kubota GB180, Kubota GB200 and others.
The clutch disc is the component responsible for transferring power from the engine (crankshaft) to the gearbox (clutch shaft). The disc consists of a splined hub mounted on the clutch shaft and a disc with springs and appropriately thick friction linings. The disc , pressed by the second clutch element, the pressure plate, uses the friction force (the lack of friction during power transfer) of these two elements to propel the tractor. The springs in the clutch discs are responsible for reducing vibrations generated during high engine speeds.
Dimensions :
- Outer diameter: 198 mm,
- Inner diameter: 25.50 mm (measured between cutter teeth), 20.50 mm (measured together with cutter teeth),
- Number of teeth: 10T,
- Thickness: 8 mm,
- Hub height: 25 mm,
- Original part numbers: 67111-13310, 67810-13310, 76621-13310, 76625-13310, 76630-13310,
- Comparison numbers: -,
- Part numbers: 32002.
Tractor models :
- Kubota A-15,
- Kubota A-17,
- Kubota A-19,
- Kubota A-155,
- Kubota A-175,
- Kubota A-195,
- Kubota Β1-16,
- Kubota Β1-17,
- Kubota B1600,
- Kubota Β1702,
- Kubota Β1902,
- Kubota GB16,
- Kubota GB18,
- Kubota GB20,
- Kubota GB160,
- Kubota GB175,
- Kubota GB180,
- Kubota GB200.
The first signs of clutch disc wear (wear) are clutch slippage , which makes it difficult or impossible to move the vehicle. The tractor fails to accelerate when the engine speed increases. The clutch disc can also show signs of wear if it is contaminated with oil. It is recommended to replace the disc along with the clutch pressure plate and release bearing, as all these components have comparable durability and wear at the same rate. Another sign of clutch disc wear is the inability to engage a gear.
Magazine: K18:H28
*Photos are for illustrative purposes only and may differ in detail from the delivered product due to differences in production over the years.
Polski
English
Deutsch
Čeština
Slovenčina
Español
Français
