Vario arrow snow plow 180 cm, hydraulic (TUZ) 4FARMER
A solid and durable snow plow will enable trouble-free operation during the winter season. It is dedicated to the maintenance of roads, sidewalks, squares with various surfaces - asphalt, concrete, paving stones.
The plow is intended for tractors and mini tractors with a minimum power of approximately 35 HP. The plow is hydraulically operated using two hydraulic cylinders and requires a three-section distributor with a floating section.
Comfort and precision
The blade has a working width of 180 cm, is mounted on the front three-point linkage of the tractor and is made of powder-coated sheet metal with a thickness of 4 mm.
The Vario 180 cm arrow snow plow has hydraulic control using two actuators and a solenoid valve. Thanks to this equipment, we can conveniently control the plow from the operator's seat using one joystick.
Professional equipment
An important safety element are four spring-loaded overrun fuses, which are located on the rear part of the blade and protect against tipping over or hitting an obstacle.
The lower edge of the blade has rubber reinforcement, 20 mm thick and 200 mm high. Thanks to this finish, we can work without fear of damaging the surface. Additionally, the plow has lighting on the two upper edges, which significantly increases work safety and improves visibility.
To improve the stability of the tractor and improve efficiency during operation , the snow plow is equipped with two wheels with a diameter of 15 cm. Their height is adjustable.
To fully use the plow's capabilities, the tractor must have hydraulics at the front of the tractor, additionally it is required to perform front lifting on the tractor first.
*The photos are for illustration purposes only, they show a 150 cm model.
Specification
State
New
Mark
4Farmer
Minimum required tractor power (HP HP PS)
35
working width (mm)
1800
Equipment
Electrovalve
Gum
Lighting
Wheels 2 pcs.
Height (mm)
900
Weight (kg)
200
Number of hydraulic cylinders
2
Color
Orange
Thickness of the rubber part of the blade (mm)
40
Maximum moldboard inclination angle (°)
from -30° to +30°