Hydraulic oil filler / EF1-25 / Cedrus RB05 / DR-CS-15HP-H 4FARMER / 1012230069011

Oil tank filter , hydraulic filter, fuel oil air filter, hydraulic filter, aeration filter with a total height of 115 mm for Cedrus RB05, DR-CS-15HP-H 4FARMER chippers and others

The main function of a hydraulic filter is to clean the hydraulic oil, retaining all impurities that enter the hydraulic system or are generated during tractor operation, such as solid (mineral) particles. The hydraulic filter should be replaced every time the hydraulic oil is changed or when the vehicle is frequently used. In the case of mini tractors, this is approximately every 100 operating hours for used tractors. The procedure for replacing the hydraulic filter in new tractors is thoroughly described in the machine's instruction manual, and usually occurs after the first 50 operating hours (at least three cycles). The hydraulic filter is usually a metal filter with a thread and seal , mounted near the tractor's transmission, directly in the hydraulic system's oil flow path, most often at the bottom of the transmission or under the tractor's floor.

Dimensions:

• total height: 115 mm,
• filter diameter: 36 mm,
• flow: 32 l/min (refueling),
• flow: 260 l/min (air),
• oil filtration area: 270c㎡,
• air filtration accuracy: 0.105 mm,
• oil filtration accuracy: 125μm (120 mesh/inch),
• part numbers: 1012230069011.

Machine models :

4FARMER :

• DR-CS-15HP-H 4FARMER.

Cedrus :

• Cedrus RB05.

Replacing the hydraulic filter (regularly) and cleaning the element in the case of a mesh filter guarantees trouble-free operation of the machine and ensures that there are no foreign bodies in the hydraulic system that can damage our tractor or negatively affect the operation of the machine by reducing its operating parameters.

Warehouse :
K18:I23:S02

*The photos are for illustrative purposes only and may differ in detail from the delivered product due to differences in production over the years.